| Material: | PP/Rpp/PVC/CPVC/HDPE/PVDF/PTFE/PFA/ETFE |
|---|---|
| Structure Feature: | Ring Form Filler |
| Type: | Random Packing |
| Usage: | Chemical Engineering, Chemical Industry Product, Sewage Treatment |
| Effect: | Improve Mass Transfer Efficiency |
| Source: | Particle |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Plastic Heilex Ring
Products introduction:
Plastic Heilex Ring is a new type of injection molding of the filler hole, it was first being developed in foreign countries out of. Later, China's such a filler were studied, and the successful development of China-made Heilex ring packing. Plastic Heilex Ring shape so that it not only has the flux, and pressure reduction and anti-corrosion resistance and good impact performance, but also has a filler would not nested, the wall flow effect of the small and the advantages of gas-liquid distribution. This applies to gas absorption packing, cooling and gas purification processes.It is a new kind of open-celled packing. Heilex ring has unique configuration, and usually made by PP injection. Plastic heilex ring enlarges its surface area and void space which contribute a lot to enhance the product performance. We can provide heilex rings in a variety of plastic, such as PP,RPP,PE,PVC,CPVC,PVDF etc.
Technical Data Sheet
| Product Name | Plastic Heilex Ring | ||||
| Material | PP,RPP,PE,PVC,CPVC,PVDF,etc. | ||||
| Life Span | >3 years | ||||
| Size mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
| 50 | 107 | 94 | 8000 | 50 | 128 |
| 76 | 75 | 95 | 3420 | 45 | 87 |
| 100 | 55 | 96 | 1850 | 48 | 62 |
| Feature | High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. | ||||
| Advantage | 1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
||||
| Application | Gas absorption, Acidic gases deabsorption system, Washing, Fertilizer production. These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. |
||||
| Performace/Material | PE | PP | RPP | PVC | CPVC | PVDF |
| Density (g/cm3) (after injection molding) | 0.98 | 0.96 | 1.2 | 1.7 | 1.8 | 1.8 |
| Operation Temp.(ºC) | 90 | >100 | >120 | >60 | >90 | >150 |
| Chemical Corrosion resistance | GOOD | GOOD | GOOD | GOOD | GOOD | GOOD |
| Compression Strength (Mpa) | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}