T Type Rto Heat Exchanger Honeycomb Ceramic for Regenerative Thermal Incinerator

• Material: Ceramic
• Structure Feature: Ring Form Filler
• Type: Structured Packing
• Usage: Chemical Engineering, Chemical Industry Product, Sewage Treatment
• Effect: Improve Mass Transfer Efficiency
• Source: Particle
• Model NO.: KS-HC02
• Groove: Plate, Single, Double, Cross, Four Footer, Chute
• Transport Package: Wooden Pallet
• Specification: Width 50-200mm, Height 50-450mm
• Trademark: Ksourceep
• Origin: China
• HS Code: 6909110000
• Production Capacity: 10000cbm/Year

Product Description

Honeycomb ceramic regenerator for regenerative thermal incinerator

The key component of regenerative thermal incinerator (RTO), the honeycomb ceramic regenerator, has the advantages of large heat exchange area per unit volume, fast heat transfer, small airflow resistance, shallow heat penetration depth, and high thermal efficiency. At present, the pore type of the honeycomb ceramic regenerator is mainly square. In actual use, the square-hole honeycomb ceramic regenerator has the following two problems: A. The cross ribs of the honeycomb ceramic regenerator are easy to block the upper and lower honeycomb layers. ceramics, thereby increasing the pressure drop of the honeycomb ceramics; B. When the airflow passes through the straight holes of the honeycomb ceramics, there is no horizontal flow, and the uniformity of the airflow on the cross-section cannot be guaranteed; therefore, the actual heat recovery rate is lower than the theoretical heat recovery rate. In order to solve the common problems of the above square-hole honeycomb ceramic regenerators, through the innovation of the structure and production process of the honeycomb ceramic products, our company developed and produced the honeycomb ceramic regenerators for regenerative thermal incinerators---sheet-shaped Combined honeycomb ceramic regenerator, the internal honeycomb structure adopts "T"-shaped arrangement design, which replaces the "ten"-shaped square hole structure arrangement of the original ordinary honeycomb ceramics, which solves the hole blocking situation of the product during use; at the same time, The internal honeycomb holes have a connected structure, which increases the void ratio, reduces the air pressure drop, improves the gas distribution on the entire section, makes the gas distribution more uniform, and improves the heat recovery efficiency of the equipment.

Item	MLM-160	MLM-180	MLM-200	Unit
Bulk density	2.25-2.35	2.25-2.35	2.25-2.35	g/cm3
Test weight	900	998	1060	kg/m3
Specific surface area	524	590	660	m2/m3
Water absorption	<0.5	<0.5	<0.5	%
Porosity	60	56	54	%
Maximum operating temperature	1180	1180	1180	ºC
Heat capacity	0.79	0.88	0.92	kJ/kg.k
Crushing strength	35	38	40	kN/cm2