Ceramic Porous Ball Inert Alumina Support Ball

• Refractoriness (℃): 1580< Refractoriness< 1770
• Feature: Wear Resistant
• Type: Refractory Material
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: KS-CR04
• Shape: Ball
• Material: Alumina Cement
• Condition: New
• Application: Oil, Chemical
• Contact Way: Stagewise Contact
• Principle: Liquid-Liquid Mass Transfer
• Transport Package: 25kgs /Bags
• Specification: 6mm-75mm
• Trademark: KSOURCEEP
• Origin: China
• HS Code: 6909190000
• Production Capacity: 300-500 Ton/Per Month
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 2.000kg

Product Description

Product Description

Products introduction:

Porous ceramic balls is also called filtering balls. It is made by make 20-30% pores inside the inert ceramic balls. Therefore it can be used not only for supporting and covering the catalyst, but also for filtering and eliminating the impurities of grain, gelatin, asphalting, heavy metal and iron ions of less than 25um. If the porous ball is set on the top of a reactor, the impurities fail to be eliminated in former process could be adsorbed in the pores inside the balls, there upon protect the catalyst and prolong the operating cycle of the system.As the impurities present in the materials are different, the user can select the product by their sizes, pores and porosity, or if necessary, add molybdenum, nickel and cobalt or other active components to prevent the catalyst from coking or poisoning. 

Application:
Porous ceramic ball is a new product developed on the basis of the inert alumina ceramic ball. It takes the diameter of the ball as the axis to open the hole. It not only has certain mechanical strength, chemical stability and thermal stability, but also increases the specific surface area. And the void ratio, thereby increasing the dispersion and flux of the material, and reducing the resistance of the system. It can be widely used in petroleum, chemical and natural gas industries to replace inert alumina ceramic balls as catalyst covering support fillers.
 

Product Parameters

Size	Crush strength
	Kgf/particle	KN/particle
1/8''(3mm)	>20	>0.20
1/4''(6mm)	>50	>0.50
3/8''(10mm)	>85	>0.85
1/2''(13mm)	>180	>1.80
3/4''(19mm)	>430	>4.30
1''(25mm)	>620	>6.20
1-1/2''(38mm)	>880	>8.80
2''(50mm)	>1200	>12.0

Packaging & Shipping