Plastic Random Packing 38mm PP Intalox Saddle Ring

• Customization: Available
• Form: Ring
• Structure Feature: Ring Form Filler
• Model NO.: KS-PR01
• Material: PP/Rpp/PVC/CPVC/HDPE/PVDF/PTFE/PFA/ETFE, PP
• Type: Random Packing
• Usage: Chemical Industry Product, Sewage Treatment
• Source: Particle
• Effect: Improve Mass Transfer Efficiency
• Typical Application: Chemical Tower, Water Treatment, Scrubber Tower
• Key Words 1: PP PVDF Intalox Saddle
• Key Words 2: 50mm Plastic Intalox Saddle Ring
• Key Words 3: 25mm PP Intalox Saddle Ring
• Transport Package: Jumbo Bags, Waven Bags
• Specification: 16, 25, 38, 50, 76mm
• Trademark: ksourceep
• Origin: China
• HS Code: 3926909090
• Production Capacity: 1000 Cubic Meters/Month
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 2.000kg

Product Description

Product Description

Products introduction:

The Plastic Intalox Saddle is made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP),polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60to 280ºC. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.
Plastic Intalox Saddle is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate

Product Name				Plastic Intalox Saddle
Material				PP,PE,PVC,CPVC,PVDF ,etc
Life Span				>3 years
Size Inch/mm		Surface Area m2/m3		Void Volume %	Packing        Number  pieces/ m^3	Packing      Density Kg/m^3	Dry Packing Factor m^-1
1"	25×12.5×1.2	288		85	97680	102	473
1-1/2"	38×19×1.2	265		95	25200	63	405
2"	50×25×1.5	250		96	9400	75	323
3"	76×38×2	200		97	3700	60	289
Feature			High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer.
Advantage			1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload.
Application			These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°.

Detailed Photos