Plastic MBBR Bio Film Carrier(MBBR).
Products introduction:
MBBR media for Moving Bed Biofilm Reactor
Material: PE or HDPE.
Size:10x7, 10x10, 11x7, 12x7, 12x10, 12x12, 14.5x10, 25x10mm, 25x12mm.
Moving Bed Bio film Reactor (MBBR) technology employs thousands of polyethylene bio film carriers operating in mixed motion within an aerated waste water treatment basin. Each individual bio carrier increases productivity through providing protected surface area to support the growth of heterotrophic and autotrophic bacteria within its cells. It is this high-density population of bacteria that achieves high-rate bio degradation within the system, while also offering process reliability and ease of operation.
MBBR processes are applied to common waste water including:
1. BOD Reduction
2. Nitrification.
3. Total Nitrogen Removal.
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
| Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
| Density(g/cm3) (after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
| Operation Temp.(ºC) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
| Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
| Compression Strength(Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Products introduction:
MBBR media for Moving Bed Biofilm Reactor
Material: PE or HDPE.
Size:10x7, 10x10, 11x7, 12x7, 12x10, 12x12, 14.5x10, 25x10mm, 25x12mm.
Moving Bed Bio film Reactor (MBBR) technology employs thousands of polyethylene bio film carriers operating in mixed motion within an aerated waste water treatment basin. Each individual bio carrier increases productivity through providing protected surface area to support the growth of heterotrophic and autotrophic bacteria within its cells. It is this high-density population of bacteria that achieves high-rate bio degradation within the system, while also offering process reliability and ease of operation.
MBBR processes are applied to common waste water including:
1. BOD Reduction
2. Nitrification.
3. Total Nitrogen Removal.
The wastewater goes through suspending media of MBBR reactor, forming biological membrane on the surface of media gradually.With the action of microbial on the biological membrane, wastewater is purified.MBBR bio media can move freely in the reactor with the mixing of the water.For the aerobic reactor, the aeration will make the media move;for the anaerobic reactor, mechanic mixing will make the media move.Our MBBR bio media is new-developed media, has better treatment effect compared with traditional media.
Physical & Chemical properties
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) ,polyvinyiidene fluoride (PVDF)and Polytetrafluoroethylene(PTFE) .The temperature in media ranges from 60 Degree C to 280 Degree C.
){kind=link}