| Material: | PP/Rpp/PVC/CPVC/HDPE/PVDF/PTFE/PFA/ETFE |
|---|---|
| Structure Feature: | Ring Form Filler |
| Type: | Random Packing |
| Usage: | Chemical Engineering, Chemical Industry Product, Sewage Treatment |
| Effect: | Improve The Wear Resistance |
| Source: | Particle |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Product's Introduction
Snowflake ring was invented by American Norton, also called intalox snowflake.The positive hexis'upper and lower composited structure owns robust exhibiting unbeatable qualities of stablility and resilience.Snowflake ring's Up and down two layer staggered and crossing distribution promotes liquid drop's the polymerization and dispersion, speeds up droplet fastly fall down. It offers superior separation efficiency and capacity in environmental application such as Gas washing, acid mist, wastewater treatment and flue gas cooling of washing and so on. Compared with other packing, Snowflake ring's pressure drop & processing efficiency is better than Pall rings and save more than 50% energy cost than Saddle ring.
Due to the diameter & design configuration, Snowflake ring is not commonly used in towers with a diameter of less than 1000mm. When snowflake ring filling in the packing bed, it will interlock during loading thus requiring more than the normal volume correction factor compared to Pall Rings. In actual application, You have to buy 15-18% more than Actual usage.
Finally, Snowflake ring was recognized the fourth generation of High performance Plastic Random Packing
Application:
1)Chlorine and Bromine production plants
2)HCl absorption in various processes
3)Emergency scrubbers
4)Environmental scrubbers and strippers
5)Air and water coolers in air separation plants
| Product Name | Plastic snowflake ring | |||||
| Material | PP,PE,PVC,CPVC,PVDF ,etc | |||||
| Life Span | >3 years | |||||
| Size | Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Packing Density Kg/m3 |
Dry Packing Factor m-1 |
|
| Inch | mm | |||||
| 3-1/2" | 90 | 138 | 97 | 5000 | 45 | 142 |
| Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. | |||||
| Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
|||||
| Application |
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 150°. | |||||
About US
1: Are you a manufacture or trader?
We are a professional manufacturer over 20 years
2:Where is your company? And visit?
Located in Xiangdong Industrial Park, Pingxiang City, Jiangxi Province.Welcome you to visit
3:Payment way
For oversea market, 40% advanced payment and 60% against copy of B/L or negotiation with you
4: After sales service
Please watch our related description
5:How long does it take to receive a reply after sending an inquiry?
24 hours. For busy, 48 hours.
6:Working time
A.M 8:00-P.M.5:00. However, for any question from internet, telephone,wechat and so on, answer you immediately.
7:Third-party test?
If you need third-party testing, we will contact with them to do it.
8: QC
Pre-sales: Material test, adopt Olympus spectrometer,material test report, third party test(necessary)
In-sales: test product material, weight, size, bulk number,pressure,Temperature resistance
After-sales:
Providing professional installation guidance.
If any problem, offer suitable opinion to solve.
About product
1:customized and logo?
Yes, we can do it
2:Package
Small plastic woven bag, super sack, cartons or upon your requirement
3:Certification
If necessary, we will entrust third-party to do it
4: MOQ
1 cubic meter
5:Production time
5-7 days to meet one 20 FCL container loading requirement
6:How much is the proofing fee? How long does the sample come out?
If only need 3D proofing, 5-7 days will finish after confirming drawing. If only need injected sample, 30-40 days will finish after confirming mold
7:HS code
Common customs codes is 3926909090,8419909000,6903200000,8419909000 and so on.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}